4 Installation
Read the "Safety Instructions" first!
Before consulting the nearest Authorized
Service for installing the drying machine, see
the information in the user guide and make sure
the electric and water utilities are as required1 If
not, call an electrician and plumber to arrange
the utilities as necessary1
It is customer's responsibility to
prepare the location the drying
machine shall be placed on and
also have power and waste water
installation prepared1
Check for any damage on the
drying machine before installing it1 If
drying machine is damaged, do not
get it installed1 Damaged products
cause a risk for your safety1
Wait - hours prior to operating the
drying machine1
The product includes a cooling
agent and if the product is operated
right after its transported, it may
NOTICE
get damaged1 After each time the
product is moved, it shall be left to
rest for - hours1
4.1 Right place for installation
•
Install the drying machine on a flat and
stable surface1
•
Dryer machine is heavy1 Do not move it by
yourself1
•
Operate the drying machine in an
environment free of dust with good
ventilation1
•
The gap between the drying machine and
the floor shall not be reduced via materials
such as rugs, pieces of wood and bands1
•
Do not block the ventilation grilles of the
drying machine1
•
There shall not be doors that can be
locked, sliding doors or hinged doors near
the installation environment of the drying
machine that may block the loading door
to be opened1
1
•
Once the drying machine is installed,
the connections must stay stable1 After
placing the drying machine, ensure that
the back wall does not come in contact
with any extrusion a water tap, electrical
outlet etc1 1
•
Place the drying machine with at least
cm space between the product and the
furniture edges1
•
Your drying machine is suitable to be
operated between +5°C to +-5°C1 If
operated outside this temperature range,
your drying machine's operation may be
compromised and get damaged1
•
The drying machine shall not be placed
with the back side against a wall1
B
Do not place the drying machine on
its power cord1
* Ignore following warning if your
product's system does not contains
R290.
Dryer contains R-90 refrigerant1*
R-90 is an environment6friendly, but
flammable refrigerant1*
2nsure that the air inlet of the dryer
is open and it is well6ventilated1*
Keep potential flame sources away
from the dryer1*
4.2 Removing the shipping
safety group
Do not leave an accessory or any
parts of the shipping safety group
NOTICE
inside the drum1
Remove the shipping
safety group prior to
first use the product1
Dryer / User manual