Beko B3T47238 User Manual page 26

7 Maintenance and cleaning
Read the "Safety Instructions" first!
7.1 Lint filters (internal and external
filters) / Cleaning of the Interior
Surface of the Loading Door
The hair and fibres that are separated from the
laundry during drying process is collected by
the Lint filter1
After each drying cycle, clean the
lint filter and the inner surface of the
loading door1
Your drying machine has - lint filters
with one placed inside the other1 Do
NOTICE
not operate the product without the
lint filters1
To clean the lint filter6
• Open the loading door1
• Hold the first part inner filter of the two part
lint filter and remove it by pulling it upwards1
• Remove the second part outer filter by
pulling it upwards1
2nsure that hair, fibre and cotton
balls do not fall into the slot where
the filters are installed1
-1
• Open both of the lint filters outer and inner
and remove the fibres with your hands or
with the brush on the air deflector1 You can
clean the hair in the filters with a vacuum
cleaner1
• Clean both filters under water running in
reverse direction of fibre accumulation or
with a soft brush1 Dry the filter before placing
it back1
Dryer / User manual