Safety Instructions - Omnitronic ALP-6A User Manual

Active speaker set
Table of Contents

Advertisement

Available languages

Available languages

2 Safety Instructions

Keep this device away from rain and moisture!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
• Please make sure that there are no obvious
transport
damages.
damages, do not take the device into operation and
immediately consult your local dealer.
• Save the package and all packing materials. In the
event that a fixture must be returned to the factory,
it is important that the fixture be returned in the
original factory box and packing.
Protection Class
• This device falls under protection class II and
features a protective insulation. The power plug
must only be plugged into a suitable outlet. The
voltage and frequency must exactly be the same
as stated on the device. Wrong voltages or power
outlets can lead to the destruction of the device
and to mortal electrical shock.
Power Cord
• Always plug in the power plug least. The power
plug must always be inserted without force. Make
sure that the plug is tightly connected with the
outlet.
• Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Never touch them with wet hands, as this could
lead to mortal electrical shock.
• Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord. Never
operate next to sources of heat or cold. Disregard
can lead to power cord damages, fire or mortal
electrical shock.
• The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable
may be damaged which may lead to mortal
damage.
• Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
HEALTH HAZARD!
Should
you
notice
CAUTION!
CAUTION!
• If extension cords are used, make sure that the
core diameter is sufficient for the required power
any
consumption
concerning the power cords are also valid for
possible extension cords.
• Always disconnect from the mains, when the
device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out
the plug by tugging the power cord. Otherwise, the
cable or plug can be damaged leading to mortal
electrical shock. If the power plug or the power
switch is not accessible, the device must be
disconnected via the mains.
If the power plug or the device is dusty, the device
must be taken out of operation, disconnected and
then be cleaned with a dry cloth. Dust can reduce
the insulation which may lead to mortal electrical
shock. More severe dirt in and at the device should
only be removed by a specialist.
Foreign Objects
• There must never be any objects entering into the
device. This is especially valid for metal parts. If
any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out
of
operation
Malfunction or short-circuits caused by metal parts
may cause mortal injuries.
Liquids
• There must never enter any liquid into power
outlets, extension cords or any holes in the housing
of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it
must immediately be disconnected. This is also
valid, if the device was exposed to high humidity.
Also if the device is still running, the device must
be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause
mortal electrical shock.
8 • EN
of
the
device.
All
and
disconnected
immediately.
warnings

Advertisement

Chapters

Table of Contents
loading

Table of Contents