Features - NETGEAR ProSafe FS750T2 User Manual

Features

The following list identifies the key features of the NETGEAR ProSafe FS750T2 Smart Switch.
•
Forty-eight 10/100 Mbps auto-sensing Ethernet switching ports and two 10/100/1000 Mbps copper ports
•
Two SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity
•
Reset Button
•
Factory Defaults Button
•
Administrative switch management
♦
IEEE 802.1Q Tag VLAN with up to 64 VIDs
♦
IEEE 802.1p QoS support, 2 priority queues per port
♦
Port-based VLAN with up to 50 groups, any one port can belong to different VLAN groups
♦
IEEE 802.3ad Link Aggregation support
♦
Web-based management with embedded HTTP server provided
♦
Supports port-setting function which allows user to enable/disable each port, set speed, duplex mode and device follow control
♦
Support Auto-Discovery application program for discovering and managing the smart switches on the network
♦
Support flash upgrading, configuration backup/restore and factory reset
♦
IEEE 802.1D Spanning Tree Protocol (Q2 2005)
♦
RFC 1157 SNMP v1 (Q2 2005)
•
Full compatibility with IEEE standards:
IEEE 802.3i (10BASE-T)
o
IEEE 802.3u (100BASE-TX)
o
IEEE 802.3z/ab (1000BASE-X, 1000Base-T)
o
IEEE 802.3x (full-duplex flow control)
o
•
Auto-sensing and auto-negotiating capabilities for all ports
•
Auto Uplink™ on all ports to make the right connection
•
Integrated address Look-Up Engine, supports 8K absolute MAC addresses
•
Full- and half-duplex functions for all 10/100 Mbps and 10/100/1000 ports
•
Store-and-Forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss/frame drops:
Half-duplex back-pressure control
o
Full-duplex IEEE 802.3x pause frame flow control
o
•
LED indicators for port status monitoring:
Power LED to indicate power on/off status
o
Link/Act LED on 10/100/1000 Mbps copper ports to indicate link status and activity
o
Dual-color Mode LED on 10/100/1000 Mbps ports to indicate speed
o
Dual-color Mode LED on 10/100 Mbps ports to indicate speed, activity
o
SFP GBIC Link/Act LED to indicate link status and activity
o
•
Flexible installation:
Standalone desktop installation
o
19-inch standard rack-mount
o
•
Standard 1U case size
Page 7 of 21