Related Manuals for Officine Gullo FE8
Summary of Contents for Officine Gullo FE8
- Page 1 INSTRUCTIONS FOR INSTALLATION AND USE FE8 / FE10 ELECTRIC OVEN FOR RESIDENTIAL AND PROFESSIONAL USE...
- Page 2 14. In case of failure or malfunction, turn the appliance off, close the gas supply valve and do not attempt to carry out any repairs, which must be done exclusively by an authorized service center. Request the use of original spare parts only. Failure to comply with the above recommendations may compromise the appliance’s safety. Officine Gullo...
-
Page 3: Table Of Contents
REPLACING THE OVEN LIGHT ....................10 CLEANING AND MAINTENANCE ..................10 WHAT TO DO IN THE EVENT OF A BREAKDOWN ..............11 PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT ..............11 GOING TO BE USED FOR SOME TIME ..................11 MAINTENANCE (only for qualified personnel) ................11 Officine Gullo... -
Page 4: Installation Manual
INSTALLATION MANUAL Fig. A/1 E. Electrical connection Officine Gullo... - Page 5 Fig. A/2 FE10 E. Electrical connection Officine Gullo...
- Page 6 Spia bianca weiße Kontroll-Leuchte Témoin blanc White light Luz indicadora blanca element Spia verde grüne Kontroll-Leuchte Témoin vert Green light Luz indicadora verde White light Timer Timer Timer Timer Timer Green light Termostato Thermostat Thermostat Thermostat Termostato Timer Thermostat Officine Gullo...
-
Page 7: Declaration Of Compliance
DECLARATION OF COMPLIANCE This appliance is manufactured by OFFICINE GULLO S.r.l Headquarters and factory Via Della Torricella 29, Antella, Bagno a Ripoli 50012 Florence - Italy Tel. +39 055 65 60 3324 +39 055 62 18 07 officinegullo.com | info@officinegullo.com... -
Page 8: Electric Connection
Attention: The manufacturer will neither be held responsible for, nor will give any compensation during the guarantee period for any damage caused, and which is due to inadequate installations not compliant with the instructions. Officine Gullo... -
Page 9: User Manual
Caution: when the oven is on, the door must be kept shut otherwise the knobs and protection sheet could get hot and be damaged. Grill: When using the grill the oven door must be closed and position the thermostat knob 200°C on position Officine Gullo... -
Page 10: Oven Illumination
All the nickel-plated and satin finished brass surfaces should be cleaned, where necessary, with a soft, possibly micro- fiber cloth, combined with a neutral detergent, if required. Do not use abrasive pads. Officine Gullo... -
Page 11: What To Do In The Event Of A Breakdown
Turn off the appliance, disconnect the power supply and clean the appliance as specified above. MAINTENANCE (only for qualified personnel) Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance,remove the plug or switch off the switch above the appliance. Officine Gullo... - Page 12 international V 2.4 - 8.20 Tel. +39 055 656 0324 | info@officinegullo.com Via Della Torricella 29, Antella, Bagno a Ripoli - 50012 Florence - Italy OFFICINEGULLO.COM...