Settings Menu Content - Hyundai ULY43TS643SMART Instruction Manual

Settings Menu Content

Picture Menu Content
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Note: Available options may differ depending on the input source.
Mode
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby
Vision Bright picture mode options will be available instead of Cinema and Natural
modes.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Energy Saving Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option (will be located under the Energy
Backlight Saving
use Left/Right directional buttons to set.
Picture Zoom Sets the desired image size format.
This option (will be located under the Picture Zoom setting) may be available depending
Picture Shift on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
Advanced Settings
Dynamic Contrast You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
Colour Temp
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
White Point under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to make
Blue Stretch
more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Micro Dimming is active, it
Micro Dimming
will enhance contrast locally for each defined zone.
Low, Medium, High and Off options are available. If the signal is weak and the picture
Noise Reduction
is noisy, use the Noise Reduction setting to reduce the amount of noise.
Films are recorded at a different number of frames per second to normal television
Film Mode
programmes. Turn this feature to Auto when you are watching films to see the fast
motion scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour
Colour Tuner
and Brightness values manually.
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as Off, the TV's
Gamut Mapping
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
You can use this option to set your gamma preference. Press Left/Right directional buttons
to set to Normal, Bright or Dark.
Gamma
Note: This option may not be available depending on the TV model and its features and you may not be able
to change this setting depending on the current content.
While watching from a HDMI source, this feature will be visible. You can use this feature
HDMI Full Range
to enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings (except Game mode).
lable if the Energy Saving is set to Custom. Highlight and
English - 16 -
Sound Menu Content
Your TV supports Dolby Atmos technology. By means of this technology the sound moves
have best experience if input audio bitstream is Atmos. Auto, On and Off options will be
Dolby Atmos
available. If set as Auto, the TV will switch between On and Off modes automatically
depending on the input audio bitstream information, if the input audio bitstream is Atmos
this feature will work as if it is set as On. Set as Off to disable.
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Mode
Note: Some items in Sound menu will be greyed out and unavailable if set to an option other than Off.
Surround Sound
Enables or disables the surround sound mode.
Press OK to open the Audio Link menu screen. Using this screen you can discover and
Audio Link connect the sound devices to your TV wirelessly. Refer to Connecting Other Wireless
Devices section for further information.
Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and
Lineout options will be available. There will be no sound output except through the
selected option and the headphone jack. Note that, if this option is set as Headphone
Only, TV speakers will be muted when headphone set is plugged in.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
Sound Output
option as Headphone Only. Please ensure before using headphones that this menu
item is set to Headphone Only. If it is set to Lineout, the output from the headphone
socket will be set to maximum which could damage your hearing.
If HDMI ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as greyed out and will be
unavailable.
Sets the sound to obtain fixed output level between programmes.
If the Mode menu item is set to an option other than Off the AVL setting options will
change. Auto, Night, Normal and Off options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
AVL (Automatic
information. If no time information is available this option will always function as Normal.
Volume Limiting)
When the TV switches to Night mode for the first time after setting this option as Auto,
an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Advanced Settings
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass Enables or disables the Dynamic Bass.
Sound Mode You can select a sound mode (if the viewed channel supports).
Digital Out Sets digital out audio type.
Sets headphone volume. This option will not be available if the Sound Output option
is set as Lineout.
Headphone
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Sets sound balance. This feature will be activated if Sound Output option is set as TV
Balance
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphones together.
Reset Resets some of the sound settings to factory defaults.
English - 17 -