Charging The Battery; Maintenance - Kayoba 957-158 User Instructions

Handle torch
Table of Contents

Advertisement

Available languages

Available languages

Use the selector to select the brightness.
Normal brightness
Charge the battery before using it for the first time.

Charging the battery

Switch off the product before charging.
Charge the battery with the mains adapter about 24 hours before using it for the first time.
Plug the mains adapter into a power outlet and connect the charger to the product. The status lamp
goes on. It takes about 12-15 hours before it is fully charged.
Plug the adapter for 12 VDC into the vehicle's 12 VDC socket and connect the charger to the
product. The red status lamp goes on. It takes about 12-15 hours before it is fully charged.
Always charge the product immediately after using it.
Do not allow the battery to become completely discharged. This will shorten the battery's useful life.
To avoid the battery becoming completely discharged, recharge it every three months even when
the product is not in use.
Replace the battery is there is a significant reduction in the battery life. Contact your dealer.
NOTE:
The product must only be serviced by qualified service personnel using identical spare parts.
Make sure that the product is completely dry before using it.
Clean the product with a cloth moistened with a mild detergent.
Never allow liquid to penetrate into the product.
Never immerse any part of the product in liquid.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
ENGLISH
USE
High brightness

MAINTENANCE

9
Off

Advertisement

Table of Contents
loading

Table of Contents