Advertisement
protective sheet from the pad, do not
touch the adhesive side.
Press the suction cup of the mounting
device against the pad (2B).
Turn the catch on the mounting device
to the desired position (2C). Rotate
the ring on the mounting device
clockwise (2D) to create a vacuum
between the suction cup and the pad.
To detach the suction cup from the
pad, proceed in the same way as when
you detach the cup from a windscreen
(9, 10, and 11).
Place or remove the mobile device
Do not place or remove a mobile
device while driving.
To place your device into the holder,
push the latch (see step 3), and slide
the device into the holder (4). Make
sure the device is firmly in place (5). To
charge the battery of your device, use
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch on
the mounting device into the slot at
the back of the holder (2E). Rotate the
holder clockwise about 90 degrees
until it locks into place (2F). Make sure
the mounting device is firmly
attached (2G).
To detach the holder from the
mounting device, rotate it
anticlockwise.
a compatible charger. To attach the
charger cable to the back of the
holder, insert the cable into the cable
support (8), and connect the charger
plug to the charger connector on your
device.
ENGLISH
Advertisement
