Advertisement
and clean the surface thoroughly with
a glass cleaner and a clean towel. If
the ambient temperature is below
+15°C (60°F), carefully warm the
surface and the suction cup with a
hair dryer to ensure a firm grip on the
windscreen. Make sure you do not
heat the windscreen excessively to
avoid damage to it.
Press the suction cup of the mounting
device against the windscreen (1C),
and rotate the ring on the mounting
Attach to a dashboard
Attach the mounting device to
the dashboard
If the product was supplied with an
adhesive pad, you can attach the
mounting device to the dashboard.
Make sure the surface where you
attach the adhesive pad on the
device clockwise (1D) to create a
vacuum between the suction cup and
the windscreen. Make sure the
mounting device is firmly attached
(1E).
To detach the suction cup from the
windscreen, rotate the ring on the
mounting device anticlockwise (9),
pull the strap located on the edge of
the suction cup (10), and pull the
holder with the mounting device from
the windscreen (11).
dashboard is flat, dry, and free from
dirt and dust.
Peel off the protective sheet from the
adhesive side of the pad (see step 2A),
and press the pad against the
dashboard so that it stays firmly in
place. When you peel off the
ENGLISH
Advertisement
