Installation - Monster iCruze IC-VOL1 Installation & User Manual

INSTALLATION

Installation Diagram/ Location Overview
Review the installation guide that came with iCruze for installation
steps required prior to Interface Cable installation.
WARNING
:
IF YOU HAVE NOT ALREADY DISCONNECTED THE NEGATIVE
TERMINAL OF THE BATTERY, DO SO NOW. WE HIGHLY
RECOMMEND CONSULTING YOUR OWNERS MANUAL
�������������������
FOR VEHICLE SPECIFIC INSTRUCTIONS AND PRECAUTIONS
����������
REGARDING BATTERY CONNECTIONS.
������
NOTE:
The IC-VOL1 package contains 2 iCruze Interface Cables. One
is for 1991-95 Volvos and the other for 1999-2002 Volvos. Besides
the year of the vehicle you will know which cable your installation
needs as soon as you remove the factory radio because the two
����
connectors are very different.
1991-95 VEHICLES ONLY
�������
������
Step 1
If your installation requires
Step 1
Connect
iCruze
the Interface Cable for to 12 volt Constant
InterfaceCable
InterfaceCable
157181
1991-95 (the one with the
large round end - #157181),
you will also need to
use the Interface Cable
that came in the iCruze
package. Connect the
large round end of the 1991-95 cable into the matching round
end of the Interface Cable from the iCruze package.