Zoom NUD360-F Installation Manual

High resolution 360 network camera, pole mount bracket: pmb-v-1

Hide thumbs Also See for NUD360-F:

High Resolution 360° Network Camera

NUD360-F

Model:

Installation Manual

Pole Mount Bracket: PMB-V-1

This is a set of fixer to mount NUD360-F to a

Adaptive Pole size:

Housing:

Mounting Screws

for Housing：

Camera Mount Base

Screws for

Camera Mount Base:

φ100~250 mm

Pole Mount Adapter:

Screws for

NUD360-F:

Vertical

Housing Unit:

Pre-assembled

LAN Cable

NUD360-F

pole.

Stainless Belt: x2

Length: 900 mm

Table of Contents

Need help?

Do you have a question about the NUD360-F and is the answer not in the manual?

Page 1 High Resolution 360° Network Camera NUD360-F Model: Installation Manual <Optional Installation> Pole Mount Bracket: PMB-V-1 Vertical This is a set of fixer to mount NUD360-F to a pole. Adaptive Pole size: φ100~250 mm Pole Mount Adapter: Housing: Mounting Screws for Housing：...
Page 2 Step 1 : Preparation 1. Prepare the camera NUD360-F. 2. Prepare a LAN cable of required length. 3. Connect the LAN cable to the camera using the cable gland supplied with the camera. The LAN cable should be out from the side.
Page 3 5. Wind up Stainless Belt by moving the cover right and left. See ③ in the right figure. 6. Put the cover to the metal fitting base and lock. 7. Take the same process 1~6 to install Stainless Belt to the other slot. CAUTION: Please wear work gloves, not to damage hands and fingers at the edges of metal parts...
Page 4 3. Fix the camera to Camera Mount Base with 4 screws (M4 x10). Note: To avoid scratches or leaving fingerprints on the lens cover, it is recommended to retain the plastic thin film covering the lens cover until the camera is completely installed and connections are completed.
Page 5 Note: About waterproof processing of LAN cable When it is necessary to waterproof the cable and cable pulled out portion, please decide the waterproofing method in advance. The camera comes with two (2) glands used for waterproof installation:  Cable Gland: For use with an Exterior-grade Ethernet cable. Exterior-grade Ethernet cables are already waterproof.