Advertisement
ATTENTION!
NOTICE:
If your package is missing parts or you are having issues with assembly, please call us directly or message
us,Our customer service team will address any questions or concerns you may have.
Have this manual open and ready for reference.
SAFETY
To reduce risk of injury when assembling & using the chair, follow these precautions:
• Read all of these instructions before assembling and using your salon chair.
• It is helpful to have 2 people assemble and turn the chair upright after assembling.
• Do not over-extend the chair(the weight of person cannot exceed 150kg), creating the risk of
falls or tipping the chair, and its occupant over, resulting in injury
PRODUCT MANUAL
PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS DEVICE
PRODUCT MANUAL
Advertisement
Table of Contents
Related Manuals for Jaxpety MR11 0233 Series
Summary of Contents for Jaxpety MR11 0233 Series
- Page 1 PRODUCT MANUAL ATTENTION! PRODUCT MANUAL PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS DEVICE NOTICE: If your package is missing parts or you are having issues with assembly, please call us directly or message us,Our customer service team will address any questions or concerns you may have. Have this manual open and ready for reference.
- Page 2 PARTS & FEATURES Backrest Left handrest Backrest connector Handrest connector Seat Handrest connector Leg support Right handrest Footrest Foot bar Pump Base...
- Page 3 INSTALLATION INSTRUCTION First:Installation pump to the base Set screw Step 1:Install the pump to the base with the 6 black bolts . Foot bar Step 2: Place assembled Base & Pump on floor. Use Pump Allen Wrench to loosen the screws in the crossbar.
- Page 4 Third：Install handrest connectors to seat handrest connector Bolt Step 1.Remove the 6 bolts which Pre-fixed in the seat. Step2.Install 2 handrest connectors to the seat with 6 bolts which removed from the seat. Please follow up the diagram beside Seat Fourth：install the footrest to the seat Seat...
- Page 5 Fifth：Install backrest to Backrest the assembled seat Right handrest Step 1.Remove the 4 bolts which Pre-fixed in the backrest 2.Install backrest to the backrest connectors that installed to the handrests by the 4 bolts . Please follow up the Bolt diagram beside Left handrest Backrest connector...
- Page 6 Seventh：install the footrest to the seat 1.Step 1:Remove the 2 bolts which pre-fixed in the seat Seat Step 2:Install the leg support to the seat by 2 the bolts . Please follow up the diagram beside Leg support Bolt Eighth：Set the Seat onto the top of Pump Step 1.
- Page 7 OPERATING THE CHAIR First： 1. In the natural state, the upper part of the pump can rotate freely on the rotation axis of the pump; 2. Hold up the foot bar to Foot bar lock the rotating . Hold up Second：Raising the Chair •...
Need help?
Do you have a question about the MR11 0233 Series and is the answer not in the manual?
Questions and answers