Vente Unique Vogue Spa TP500 User Manual page 38

Preferences
F / C (Temp Display)
Change the temperature between Fahrenheit and Celsius.
12 / 24 (Time Display)
Change the clock between 12 hr and 24 hr display.
RE-MIN-DERS (Reminders)
Turn the display of reminder messages (like "Clean Filter") On or Off.
Note: Reminders continue to run in the background even when not displayed. So turning the display of Reminders On or Off does not reset
any Reminder counts.
CLN-UP (Cleanup)
Cleanup Cycle Duration is not always enabled, so it may not appear. When it is available, set the length of time Pump 1 will run after each
use. 0-4 hours are available.
M8
(This message may not appear on all systems.) On systems that have M8, it is enabled by default. It can be disabled
(or re-enabled) here. M8 reduces polling intervals when the water temperature in the spa is steady.
DOL-PHIN-AD-DRES (Dolphin II and Dolphin III) Applies to RF Dolphin only.
When set to 0, no addressing is used. Use this setting for a Dolphin Remote which is factory set for no address by default. When set
between 1 and 7, the number is the address. (See the Dolphin manual for details.)
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815,
7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. Allmaterial copyright
of Balboa Water Group.
37