Table of Contents
Advertisement
12
Technical Data
12.1
Puridest Bi Distillation Apparatus models PD 2 D, PD 4 D
Exterior dimensions (W x D x H)
Distillation capacity
Distillate quality
The conductivity of the distilled water is directly related to the chemical composition of the raw water. Components of the raw water having the same
or a lower evaporation point than water may deteriorate the conductivity.
Cooling water required
Low water cut-off
Water pressure min. / max.
Electrical connection
Mains supply /
On-site fuse
Caution! Mains voltage deviations, even with the mentioned limits, influence the quantity of distillate produced.
Protection class / - type
Surrounding conditions
Height above MSL
Ambient temperature
Humidity
Net Weight
Weight with water filling
16 / 32
PD 2 D
530 mm x 260 mm x 495 mm
2 l / h mono or bi distillate
Mono distillate
approx. 2.1 µS / cm at 25 °C
Bi distillate
approx. 1.6 µS / cm at 25 °C
in conformity with DAB, bacteria and pyro-
gen free, low gas content.
72 l / h
Electromechanical temperature limiter, with
capillary tube sensor.
Switch-off temperature 135 °C / -15 K
> 3 bar / 7 bar
> 43.5 psi / 101.5 psi
230 V +/-10 %, 50 / 60 Hz, 3.5 kW
Mains connection cable for permanent
connection to the mains, on-site 16 A inert
I / IP20
Use only inside buildings (not in potentially
explosive areas).
up to 2000 m MSL
+10 °C to +40 °C
max. 80 % rel. humidity to 31 °C, decreasing
to 40 % rel. humidity at 40 °C
20.4 kg
38.4 kg
Puridest Bi Distillation Apparatus
PD 4 D
570 mm x 280 mm x 610 mm
4 l / h mono or bi distillate
Mono distillate
approx. 2.1 µS / cm at 25 °C
Bi distillate
approx. 1.6 µS / cm at 25 °C
in conformity with DAB, bacteria and pyrogen free, low
gas content.
120 l / h
Electromechanical temperature limiter, with capillary tube
sensor.
Switch-off temperature 135 °C / -15 K
> 3 bar / 7 bar
> 43.5 psi / 101.5 psi
220 V / 3 ~ / PE +/-10 % 50 / 60 Hz, 7.0 kW
Mains connection cable for permanent connec-tion to
the mains, on-site 3 x 20 A inert
or
400 V / 3 ~ / N / PE +/-10 %, 50 / 60 Hz, 7.0 kW
Mains connection cable for permanent connec-tion to
the mains, on-site 3 x 16 A inert
I / IP20
Use only inside buildings (not in potentially explosive
areas).
up to 2000 m MSL
+10 °C to +40 °C
max. 80 % rel. humidity to 31 °C, decreasing to 40 % rel.
humidity at 40 °C
27.5 kg
49.5 kg
09/2020
Advertisement
Table of Contents
