Advertisement
Figure 2-2 Atta h the Mou ti g Base to the Ceili g
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden wall/ceiling,
self-tapping screws are required.
5. Route the a les th ough the a le hole, o the side
ope i g.
6. Align the camera with the mounting base, and
secure the camera on the mounting base.
Figure 2-3 Se u e the Ca e a ith Mou ti g Base
7. Co e t the o espo di g a les, su h as po e
o d, a d ideo a le.
8. Po e o the a e a to he k hethe the i age
o the o ito is gotte f o the opti u a gle. If
ot, adjust the a e a a o di g to the figu e elo
to get a opti u a gle.
Pan Position
[0° to 360°]
1). Hold the a e a od a d otate the e losu e
to adjust the pa positio [ ° to
2). Mo e the a e a od up a d do
the tilt positio [ ° to
3). Rotate the a e a od to adjust the otatio
positio [ ° to
2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You eed to pu hase a ju tio
Steps:
1. Paste the drill template on the eili g/ all.
2. Drill screw holes and the cable hole (optional) in the
eili g/ all according to the holes of the drill
template.
Tilt Position
[0°to 75°]
Figure 2-4 -a is Adjust e t
Rotation Position
[0°to 360°]
°].
°].
o sepa atel .
°].
to adjust
Advertisement
