Maintenance Of The Evoke Ci And Evoke Cst; Maintenance Of The Evoke Ci; Maintenance Of The Evoke Cst; Updating The Evoke Ci Software - SALUDA MEDICAL Evoke SCS Clinical Manual

Hide thumbs Also See for Evoke SCS:

Table of Contents

3. The Evoke System has not been tested for MRI compatibility and is MR unsafe. The

Patient ID card indicates that the patient must not undergo an MRI scan with the

Evoke System implanted.

16 Maintenance of the Evoke CI and Evoke CST

Maintenance and cleaning of the Clinical Interface should be carried out according to

instructions in the device manual accompanying the CI tablet.

The CST is not expected to be in direct contact with patients but should still be periodically

cleaned. The CST can be cleaned with a soft cloth dampened with a mild disinfectant or alcohol.

Refer to the Evoke SCS System User Manual for advice on the maintenance of additional

components of the Evoke SCS System.

The CI contains software that automatically checks if there are any updates that can be

downloaded and applied to the CI. The CI must be connected to the internet for this check and

update to be completed.

When the software detects that an update is required it will show the following message:

Touch "Yes" to download and apply the updates now, or "No" if you wish to update later.

Note: The update should be applied as soon as possible, but if there is not sufficient

time the software will continue to popup reminders until the update is applied.

The update process will take several minutes during which you will be unable to use the

programs. You will receive a message once the update for each program is complete.

CLIN-UMAN-005175

Evoke® SCS System Clinical Manual

Figure 16.1: Prompt message for software update.

Revision: 9.00

Page 82 of 101

Table of Contents