Summary of Contents for Verity Audio ADD60S
- Page 1 Please read this manual completely before operating the system. A division of Component Solution Services, LLC. 56600 Twin Branch Dr., Mishawaka, IN 46545 wwwVeritysafe.com Verity Rear Vision Systems All rights reserved...
-
Page 2: Think Safety First
® Thank you for your purchase of our Verity products. When installed and used properly, your ADD60S is designed to deliver you years of trouble-free operation. This manual contains important information required to properly install and operate the unit. Verity systems are designed for quick installation by trained professionals in proper installation environments. -
Page 3: Specifications
FUNCTIONS • Ultra-long detecting distance, detecting range 0m to 3m. • The sensor will remember fixed back obstacle distance (for example, grab rails), and avoid the consecutive alarm. • Numeral display. • Adjustable buzzer volume. • The maximum installation space of the sensor is 31 inches. - Page 4 COMPONENTS 4 Sensors 4) 2m. Sensor Adjustable Buzzer Extension Cables 59” CPU Power Cable Sensor Harness 10 m. Camera Cable 2-pin Buzzer Cable...
- Page 5 DISPLAY Display / Buzzer Indicators Distance / Number of White Distance Tone Boxes Per Side Displayed 0-0.5 Solid 06-1.2 Beep.Beep.Beep 1.2-1.8 Beep.Beep.Beep 1.8-2.4 Beep.Beep Beep…Beep 2.4-3...
- Page 6 In Cab Buzzer: Placed in the cab of the truck Not by the back bumper The buzzer is the only 2-pin connection in the system. This makes it impossible for wrong connections. The buzzer has a volume switch. Settings are Off / Lo / Hi. Turning off the buzzer should not be an option because it removes the functionality of the system.
-
Page 7: Sensor Installation
SENSOR INSTALLATION Distance between Sensors 50-80 cm / 19" – 31" The minimum height of the ground is 60 cm – 24" Sensors will not detect the first 20 cm – 8"... - Page 8 The Sensors are 4-pin waterproof aviation connections. They are universal and can be attached to any of the four connections on the sensor harness. Sensor hole size: 24.43mm to 25.4 mm 123/128" .in – 1" O-rings and angle adjusters 5-degree adjustment rings are supplied to counter up to a 10-degree angle in the mounting surface.
-
Page 9: Cpu Installation
The sensors have an upside and downside. The arrows need to point UP. CPU INSTALLATION Inside the LEFT rail area is the suggested location. Location is determined by the installation location's availability of your install. -
Page 10: Wiring Diagram
WIRING DIAGRAM... - Page 11 Verity Rear Vision Systems A division of COMPONENT SOLUTION SERVICES (CSS) LIMITED ONE (1) YEAR WARRANTY 1. CSS products’ warranties are not transferable. The warranties apply to the retail consumer for one (1) year and covers against defects in material and workmanship on cameras and monitors. We do not warranty our cables which are QC tested at three different stations before shipping.
- Page 12 Technical Support A service ticket can be filled out online to supply the quickest service. The service ticket can be easily found on our website www.veritysafe.com or use the code to the right. Please have the Purchase Data available (page 8) when contacting the service department.