Table of Contents
Advertisement
In Cab Buzzer: Placed in the cab of the truck
Not by the back bumper
The buzzer is the only 2-pin connection in the system.
This makes it impossible for wrong connections. The buzzer
has a volume switch. Settings are Off / Lo / Hi. Turning off
the buzzer should not be an option because it removes the
functionality of the system. The buzzer has 3M adhesive
tape for quick installation. Be sure to mount in a place
where it can clearly be heard. Under the seat against the
back wall of the truck is not a good location.
Off is for maintenance propose only.
Advertisement
Table of Contents
