Toro Z Master 4000 Series Operator's Manual page 11

3. Secure the assembled caster weight to the caster arm using 2 carriage bolts (3/8 x 1 inch) and 2 flange
nuts (3/8 inch) as shown in
1. Carriage bolt (3/8 x 1 inch)
2. Weight
4. Repeat steps 1 through
5. Secure the weight bracket assembly to the frame using 4 carriage bolts (3/8 x 1 inch) and 4 flange
nuts (3/8 inch) as shown in
6. Insert the 2 suitcase weights into the weight bracket assembly and secure them using 2 carriage bolts (3/8
x 5 inches) and 2 locknuts (3/8 inch) as shown in
Figure 8.
Figure 8
3 on the other side.
Figure 9.
3. Flange nut (3/8 inch)
Figure 9.
11
g375807