Table of Contents
Advertisement
Parts and Functions
Front panel
1
2
5
6
No.
Part
1 +/–:
Stimulator output display polarity switch
2 OUTPUT MONITOR:
Output panel meter
3 VOLTAGE MAG:
Voltage magnifier knob
4 STIM/OFF: Output switch
5 MODE: CURRENT/VOLTAGE
Current/Voltage selector
6 FINE: Output adjuster
7
: Output polarity switch
8 CURRENT ALARM: ON/OFF
Constant-current alarm switch
9 OUTPUT: Output terminals
A INPUT: Input connector
B MONITOR OUTPUT:
Output connector
3
4
7
8
9
Selects the polarity of the stimulator output to display on the OUTPUT
MONITOR 2.
This setting is not related to 7.
+: Displays the positive pulse of the stimulator output on the OUTPUT
MONITOR 2.
–: Displays the negative pulse of the stimulator output on the OUTPUT
MONITOR 2.
Displays output settings as well as output voltage and current during stimulation.
When 5 is set to "VOLTAGE", use this knob to select how many times the
voltage selected with knob 6 will be multiplied during output.
STIM : Outputs stimulation voltage or current.
OFF : Turns off stimulation voltage and current. Also use this setting to preset
a stimulation voltage or current.
Select current or voltage output.
Adjusts output voltage and current.
Selects the polarity of output from this device.
: Red terminal becomes +.
: Red terminal becomes –.
ON
: Outputs an alarm when the load electrode resistance during constant-
current output is too large to output current.
OFF : No alarm is output.
Connect an electrode lead to output stimulation voltage or current to human subjects.
Use the supplied connecting cable to connect this connector to the output
connector (to ISO) on an electronic stimulator.
Use this connector to connect to a monitoring device to monitor OUTPUT
waveforms.
Rear panel
A
B
Description
3
Advertisement
Table of Contents
