(En) Instructions For Use - Philips IntelliVue MX40 Instructions For Use Manual

EN Instructions for Use
ASSOCIATED DOCUMENT
Refer to the Cables and Lead Sets Care, Cleaning, and Disinfection document that
accompanies this Instructions for Use (IFU) for validated lead set and cable
cleaning/disinfecting agents and procedures.
INTENDED USE
Philips Intellivue MX40 with Masimo SET
intended for monitoring and recording of and to generate alarms for, multiple
physiological parameters of adults and pediatrics in a hospital environment and
during patient transport inside hospitals. Not intended for home use. Intended for
use by health care professionals.
Indications for Use
Philips Intellivue MX40 with Masimo SET
indicated for continuous monitoring of cardiac signals and pulse oximetry, for both
diagnostic and monitoring purposes in adult and pediatric patients. These devices
are limited by the indications for use of the connected monitoring and diagnostic
equipment. These devices are intended to interact with patient intact skin only.
Contraindications
There are no known contraindications.
PRODUCT DESCRIPTIONS
The ECG/SpO graphic shown at the front of this document, and the table below,
2
provide cable product descriptions.
989803202391 MX40 Adapter Masimo SpO2-only
989803202381 MX40 Adapter 5-Lead + Masimo SpO2
989803204291 MX40 Adapter 6-Lead + Masimo SpO2
989803202411 ECG 5L Grabber, AAMI, Masimo SpO2, Tele
989803202421 ECG 5L Grabber, IEC, Masimo SpO2, Tele
COMPATIBILITY
These cables and leads are compatible only with MX40 monitors that meet production release
C.01 or later; i.e. MX40 monitors shipped prior to release C.01 do not support Masimo SET
SpO technology and will not work.
2
®
Reusable Adapter and ECG Cables are
®
Reusable Adapter and ECG Cables are
Cable
1
Length
160mm (6.25 in)
240mm (9.5 in)
240mm (9.5 in)
ECG Leads:
0.85m (34 in),
SpO Adapter:
2
160mm (6.25 in)
®