Buffalo AirStation WXR-1900DHP User Manual page 92

6
Navigate to Advanced Settings - Wireless - Wireless Bridge.
7
If the access point supports WPS or AOSS, you can use either to connect the AirStation.
8
You can also manually select the access point by opening the Manual Connection page. Select the access point
from the available list of detected wireless access points. Set the wireless authentication and encryption to match
that of the access point device and click OK. If the access point is not displayed, click to Search Again to refresh the
list.
9
Enable Repeater to automatically use the access point's SSID and security settings.
10
Click Apply to save your changes.
The AirStation should now be connected as a repeater. You can disconnect the Ethernet cable and move the AirStation
to another location that is within range of the access point. Other devices can now connect to the AirStation to use the
Internet.
92