2.4 Ghz/5 Ghz - Buffalo AirStation WXR-1900DHP User Manual

2.4 GHz/5 GHz

Configure basic wireless settings from here.
Wireless - 2.4 GHz or 5 GHz
Wireless
Wireless Channel
High-Speed Mode
Broadcast SSID
SSID 1
SSID 2
SSID Isolation
Wireless Authentication
Determines whether to allow wireless communication. If this is unchecked, no wireless
connections will be allowed.
Sets a channel (a range of frequencies) for wireless connections. With Auto Channel
selected, the AirStation will automatically use the best available channel.
Configure the bandwidth for wireless communication. To increase communication rate,
set the bandwidth to 40 MHz and configure extension channel.
If Allow is checked, then the AirStation will respond to SSID searches from wireless
devices by broadcasting its SSID. If Allow is unchecked, the AirStation ignores SSID
searches from wireless devices.
Enable or disable the main SSID (SSID 1) and sub SSID (SSID 2).
Enable to make wireless devices connected to the specified SSID be able to
communicate only with Internet-side devices.
Select an authentication method for SSID 1 from below:
WPA/WPA2-mixed mode PSK
Sets the authentication method to allow both WPA-PSK and WPA2-PSK at the same time.
WPA2-PSK
Sets the authentication method to WPA2 (IEEE 802.11i).
WPA-PSK
Sets the authentication method to WPA (Wi-Fi Protected Access).
No Authentication
Connect to wireless clients without using any authentication method.
32