Safety; Safety Marks Contained In These Instructions; Dangers From Non Observance Of Safety References; Active Safety - HL -i Series Use And Maintenance Handbook

SAFETY

These instructions contain basic references to correctly and safely use and service our units.
Besides general safety precautions, all specially marked points must be duly observed.

SAFETY MARKS CONTAINED IN THESE INSTRUCTIONS

This manual contains some information and references which are marked by symbols. If the safety
precautions marked by the symbol "danger from general cause" are not complied with injuries to
persons may be caused.
If the safety precautions marked by the symbol "danger from electrical causes" are not complied
with injuries to persons or damages to things may be caused.
If the safety precautions highlighted by the word
are not complied with, damages to the unit or to itsfunctions may be caused.

DANGERS FROM NON OBSERVANCE OF SAFETY REFERENCES

Non-observance of safety references may cause bodily harm to persons or damage to the equipment.
Failure to comply with safety references shall invalidate warranty and/or damage claims.
Non-compliance could have the following dangerous consequences:
- Failure of important system functions;
- Risk for the operators' safety due to electrical and/or mechanical causes.

ACTIVE SAFETY

The operating logic of our units is controlled by a microprocessor.
This microprocessor also manages faults and malfunctions (if any) of every part of the unit, thus
ensuring no risks are run by machinery, persons and the environment.

PASSIVE SAFETY

Our units are completely enclosed by panels, which prevent access to dangerous areas from outside,
including fans which are equipped with suitable protection grilles.
1