Emergencies; Main Components - HL -i Series Use And Maintenance Handbook

EMERGENCIES

By:
Floods:
Immediately cut out the automatic circuit breaker that is located upstream the power supply line to
the unit and turn off the water pump (if it is part of the hydraulic system). Then repair the defective part of the
water circuit.
Fire:
Immediately cut out the automatic circuit breaker which is located upstream the power supply line to
the unit and use a powder-based or CO -based fire extinguishing product.
2

MAIN COMPONENTS

PANELS AND FRAME
IMPORTANT: Panels (fixed guards) enclose potentially dangerous areas in case of failure or damage; before they
are removed disconnect the unit power supply from the main switch and turn OFF the water inlet supply.
The panels enclosing the various parts of the unit are made up of painted galvanised steel plate.
The technical compartment is closed. It contains the compressors and the main components of the unit.
COMPRESSOR
A highly reliable compressor with high-efficiency in performance, protected by an internal thermal overload.
COATED CONDENSER FINS
The aluminium fins on the condenser are coated with special anti-corrosion material ensuring the endurance of the
condenser.
INTEGRAL STAINLESS STEEL WATER TANK
The high volume integral stainless steel tank help maintaining an optimum water temperature to minimise the
compressor starts for reaching a longer compressor life.
AXAIL FANS
Axial fans are directly coupled to an electric 8-6 pole motor with overload protection, electronic balancing, and
blades with low-sound-level wing contour and complete with a special air conveyor and protection grilles.
IMPORTANT:
─The protection grille for fans is a fixed guard enclosing a risk zone of the unit;
─ Do not remove it, replace it if damaged.
8