Appliances And Devices; Fast Charging Usb Ports; Furnace - ModVans CV1 Owner's Manual

Appliances and Devices

Fast Charging USB Ports

The CV1 includes 2 fast charging (2.1A) USB ports. They are located in the control panel, behind the volt
meter, and are powered by the house battery. There are two additional USB ports in the dash (one on
top in front of the driver, and one below the vehicle climate controls). These are powered by the chassis
battery and do not provide fast charging.

Furnace

To use the furnace, turn on the LP Gas switch, then
use the furnace controls on the Control Panel to set
the desired temperature and fan speed. See the
furnace owner's manual for detailed instructions.
To set the furnace thermostat temperature (or to turn
off):
1. Rotate the knob to select the flame icon
2. Tap the knob to enter temperature selection mode
3. Rotate the knob to the desired temperature (or all the way counterclockwise to off)
4. Tap the knob to set the selected temperature
When the furnace is in use, the fan can be set to 3 different speeds: ECO, HIGH and BOOST. In addition,
the fan can be used to recirculate air in VENT mode. To set the fan mode:
1. Rotate the knob to select the fan icon
2. Tap the knob to enter fan selection mode
3. Rotate the knob to the desired fan mode
4. Tap the knob to set the fan mode
The furnace has three hot air outlets: one on the driver's side just in front of the storage bin, one on the
driver's side rear corner, and one on the passenger side rear corner. All three are circular outlets
mounted just under the windows, with covers that can be closed. The cold air return for the furnace is
the metal grill on the floor next to the driver's side storage bin. It must be kept unobstructed when the
furnace is in use.
ModVans CV1 Owner's Manual V1.1 15