Advertisement
RIM (HOOP) ATTACHMENT
8. Connection C8: Remove the cover plate from the underside of the rim assembly.
Put the rim against the backboard and align holes. Attach with four B6, four W6 four
W7 and four N6, making sure the rim is straight and level. Tighten completely.
Replace the cover plate.
RIM HEIGHT STICKER ATTACHMENT
-Raise the backboard assembly
until the rim is 10 feet high
above the floor.
-Make a mark on the actuator in
line with the bottom edge of the
indicator.
-Lower the backboard assembly
all the way.
-Peel off and apply the rim
height sticker to the actuator,
lining up the 10' line on the
mark previously made.
Page 8
Advertisement
