Backboard Attachment - PROformance Hoops CV Series Installation & Owner's Instructions

BACKBOARD ATTACHMENT

6. Connection C6: Using the actuator, crank the lower arm to a high position. Allow
the upper arms to stay down. Carefully lift and support the backboard and align
upper backboard holes with upper arm holes. Each connection uses one B1, two
W1, two P1 and one N1. Allow movement between parts. Do not over-tighten.
7. Connection C7: Raise and support the backboard to a higher position. Using the
actuator, crank the lower arm to a lower position, aligning lower backboard holes
with the lower arm holes. Each connection uses one B3, two W1, two P1 (which
should be already on the arm) and one N1. Do not over-tighten.
Page 7