Advertisement
Available languages
Available languages
Installing the wall-mount bracket
To Sony Dealers
Be sure to install the wall-mount bracket
securely to a wall according to the supplied
instructions.
If any of the screws are loose or fall out, the wall-
mount bracket may fall and cause injury or property
damage. Be sure to use the appropriate screws for the
wall material and install the unit securely.
Be sure to use the screws and supplied
attachment parts properly according to the
supplied instructions. If you use substitute
items, the product may fall and cause
bodily injury to someone or damage to the
product.
The screws needed to secure the wall-mount
bracket to a wall are not supplied.
Use appropriate screws for the wall material and
structure when mounting the wall-mount bracket.
30 mm (1 3/16 in) or longer
Be sure to assemble the bracket properly
according to the supplied instructions.
If any of the screws are loose or fall out, the product
may fall and cause bodily injury to someone or
damage to the product.
Be sure to tighten the screws securely in the
designated position.
If you fail to do so, the product may fall and cause
bodily injury to someone or damage to the product.
Be careful not to subject the product to shock
during installation.
If the product is exposed to shock, it may fall or break
apart. This may cause injury.
Be sure to install the product on a wall that is
both vertical and flat.
If you fail to do so, the product may fall and cause
injury.
Do not allow the power cord or the connecting
cable to be pinched.
If the power cord or the connecting cable is pinched
between the unit and the wall or is bent or twisted by
force, the internal conductors may become exposed
and cause a short circuit or an electrical break. This
may cause a fire or an electric shock.
4
GB
6 mm - 8 mm (1/4 in - 11/32 in)
or equivalent
(Quantity: 4)
Attaching safety wires
To Sony Dealers
• Please use safety wires (commercially available)
according to the supplied instructions.
• Make sure to attach safety wires in locations that are
effective in preventing the product falling.
• The use of wires with insufficient strength may result
in the product falling and may cause an injury or
serious accident.
• Follow the instructions provided by the fall
prevention safety wire manufacturer.
• Consult a professional contractor for the correct use
of safety wires.
• When installing this product, follow all applicable
ordinances, regulations, and laws.
• It is the responsibility of the contractor to install
this product and the wall-mount bracket, and to
guarantee the reliability of the installation method
used.
• After installation, regularly inspect the wall-mount
bracket for loose screws and corrosion of metal
parts.
Advertisement
