Table of Contents
Advertisement
Available languages
Available languages
English
.................................................................................................................................................................................................................................................................................................
Tool Button ‐ Distance Unit
Switch (Metric / Imperial)
Tool Button ‐ Reset
Measurement
NOTE: The measurement value will be saved even when the device is turned off. Only after
you reset it by pressing Reset Measurement button will its value be erased.
‐ Change Time Zone:
When the device is under off status, press and hold both Power and Tool buttons until it's
powered on. Then the "Time" will start to flash. Press Power button to select time zone.
The number 00‐23 is one way circling. Press LCD Backlight button to save the time zone
setting.
Please refer to the conversion chart below when your time zone is with negative value.
Time Zone
‐1
(GMT)
Device
23
Setting
NOTE: The device time zone setting is for LCD on‐screen display only and will not affect log
data. Log data are all recorded as standard GMT+0 and can be changed in
accordance with your local time after loading to SW.
.................................................................................................................................................................................................................................................................................................
4
After power on Explore 2000, press and hold for 1 sec to
switch between two distance unit
After power on Explore 2000, press and hold for 5 sec to
reset measurement value: Odometer, Timer, and
Average Speed
‐2
‐3
‐4
22
21
20
‐5
‐6
‐7
19
18
17
‐8
‐9
‐10
16
15
14
www.Qstarz.com
‐11
13
Advertisement
Table of Contents
