Pegasus LUXURY AT HAND 729071 Installation Manual page 3

Preparation/Assembly
1
2
3A
Steps 1-3A
1 Shut off water supply. Remove old faucet. Clean sink
surface in preparation for new faucet.
Suitable only for 3-hole basin (for 8" application - 4"
center to center).
Install porcelain bowl first. Remove rubber washer, metal
washer and lock nut from the shank. Attach shank into
porcelain bowl, then place it in position on sink. From
under sink, replace rubber washer and metal washer, and
secure with lonk nut.
2 Remove rubber washer, metal washer and lock lut from
the spout shank. Place new faucet in position on sink.
From under sink, replace rubber washer and metal
washer, and secure with lock nut.
(A) Stainless Steel Braided Faucet Supply Tubes: This is
3A
the simplest of all installations. If you are using stainless
steel braided faucet supply tubes, this faucet requires one
end of the supply tube to have a 1/2" female IPS
connection. The other end of this supply tube must match
the thread on the water supply fittings or shut off valve
under your sink. Once you have identified the required
tube, carefully follow the manufacturer's installations
instructions for each tube.