Samsung 5 Series User Manual page 17

White Balance
„
You can adjust the colour temperature for more natural picture colours.
• R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain
• Reset : Resets the default white balance.
Flesh Tone
„
You can emphasize the pink flesh tone in the picture.
Changing the adjustment value will refresh the adjusted screen.
N
Edge Enhancement → Off / On
„
You can emphasize object boundaries in the picture.
xvYCC → Off / On
„
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
N
This function may not be supported depending on your external device
N
Picture Options
❑
You can customize the additional picture settings to suit your preference.
In PC mode, you can only make changes to the Colour Tone, Size and Screen
N
Burn Protection from among the items in Picture Options.
Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3
„
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
N
Warm1, Warm2, or Warm3 is only activated when the picture mode is Movie.
N
Size → Auto Wide / 16:9 / Wide Zoom / Zoom / 4:3 / Screen Fit
„
You can select the picture size which best corresponds to your viewing requirements.
• Auto Wide : Sets the picture in Auto Wide format.
• 16:9 : Sets the picture to the 16:9 aspect ratio.
• Wide Zoom : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture
vertically.
• Zoom : Stretches the 16:9 aspect ratio picture vertically.
• 4:3 : Sets the picture to the 4:3 aspect ratio.
• Screen Fit : Displays the full native HD signal that cannot be viewed using a normal TV.
Alternately, you can press the
O
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
N
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
N
Settings can be adjusted and stored for each external device you have connected
N
to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
Wide Zoom : Press the ► button to select Position, then press the ENTER E button.
N
Press the ▲ or ▼ button to move the screen up / down. Then press the ENTER E button.
Zoom : Press the ► button to select Position, then press the ENTER E button. Press the ▲ or ▼ button to move the
N
picture up and down. Then press the ENTER E button. Press the ► button to select Size, then press the ENTER E button.
Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER E button.
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
N
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset : Press the ◄ or ► button to select Reset, then press the ENTER E button. You can initialize the setting.
N
Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
If you use the
N
function.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
„
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
This function is available in
N
This function is not available in
N
Digital NR → Off / Low / Medium / High / Auto
„
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
P.SIZE button on the remote control repeatedly to change the picture size.
Auto Wide mode.
PC, Component or HDMI mode.
English - 17
: Changing the adjustment value will refresh the adjusted screen.
Picture mode.
Tint (G/R) : G50/R50
Advanced Settings
Picture Options ►
Picture Reset
Continued...