Page 2
Edition Notes The Rogue Outcast 3 Spot User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Rogue Outcast 3 Spot as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, Rogue, Outcast, and Rogue Outcast are registered trademarks or trademarks of Chauvet &...
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Rogue Outcast 3 Spot User Manual Rev. 1 Page 1 of 21...
• Make sure to replace the fuse with another of the same type and rating. • Never disconnect this product by pulling or tugging on the power cable. Page 2 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Rogue Outcast 3 Spot User Manual Rev. 1 Page 3 of 21...
7-position and split-color enabled color wheels, and five facet prism to create stunning looks. A zoom range of 4.5 – 38.1° allows the Rogue Outcast 3 Spot to easily cover stages and large surfaces from a distance.
257 mm 241 mm 17.48 in 444 mm 25.16 in 639 mm 13.46 in 342 mm 4.23 in 107 mm 14.41 in 9.61 in 366 mm 244 mm Rogue Outcast 3 Spot User Manual Rev. 1 Page 5 of 21...
Power Linking The product supports power linking. It is possible to power link up to 2 Rogue Outcast 3 Spot products at 100 V or 120 V, 4 products at 208 V, or up to 5 products at 230 V or 240 V. Never exceed this number. This product comes with a power input cable.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Rogue Outcast 3 Spot comes with 2 omega brackets to which you can directly attach mounting clamps (sold separately). Make sure the clamps are capable of supporting the weight of this product. Use at least two mounting points per product.
Navigates upwards through the menu list or increases the value when in a function <DOWN> Navigates downwards through the menu list or decreases the value when in a function Menu Map Refer to the Rogue Outcast 3 Spot product page on www.chauvetprofessional.com for the latest menu map.
Page 13
USB Update Update firmware via USB C Pan/Tilt Prism Color/Iris Reset individual functions or all Reset functions from start-up Gobo/Gobo2 Frost Factory Set Reset to factory default settings Rogue Outcast 3 Spot User Manual Rev. 1 Page 9 of 21...
146 215 Random strobe, slow to fast 216 255 On 000 001 No function Virtual shaking 002 128 Shaking effect, slow to fast 129 255 Fade effect, slow to fast Page 10 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
Page 15
112 119 Gobo 1 shaking, slow to fast 120 127 Open 128 191 Gobo scroll, slow to fast 192 255 Reverse gobo scroll, slow to fast Rogue Outcast 3 Spot User Manual Rev. 1 Page 11 of 21...
Page 16
211 255 Auto detect distance Zoom 000 255 0–100% – Zoom fine 000 255 Fine control (16-bit) 000 004 No function Prism 005 255 Prism insert Page 12 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
184 191 Fan ECO 192 199 Fan Full 200 215 Fan Auto 216 255 No function Color Wheels Color Wheel 1 Color Wheel 2 Rogue Outcast 3 Spot User Manual Rev. 1 Page 13 of 21...
To set the orientation of the display: 1. Go to the Setup main level. 2. Select the Screen Reverse option. 3. Select from NO (right-side up), YES (upside-down), or AUTO (automatic orientation). Page 14 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
To adjust the frequency of the pulse width modulation: 1. Go to the Setup main level. 2. Select the PWM Option option. 3. Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 15000Hz. Rogue Outcast 3 Spot User Manual Rev. 1 Page 15 of 21...
3. Select NO (to cancel) or YES (to reset the product configuration). Test Mode Auto Test To have the Rogue Outcast 3 Spot automatically test all functions one after the other: 1. Go to the Run Mode main level. 2. Select the Auto Test option.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If correctly installed, the gobo holder should easily slide into the gobo wheel slot. Diagram Locate Pull back Remove Gobo holder Gobo Retaining ring Rogue Outcast 3 Spot User Manual Rev. 1 Page 17 of 21...
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans with compressed air. Damage may result. Page 18 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 20 of 21 Rogue Outcast 3 Spot User Manual Rev. 1...
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Rogue Outcast 3 Spot User Manual Rev. 1 Page 21 of 21...