Advertisement
Part Name
Starting Relay (PTC)
1. Release screws that hold Relay
Cover.
4. Remove Starting Relay.
PRINTED : May'2015
Operating Procedure
- Follow step 1-4 of replacing Elec. Component Ass'y.
2. Remove Relay Cover.
Hold Recept Terminal then pull out
5.
electrical wires from Starting Relay.
3. Lever Starting Relay by flatton
screw driver.
6. After Replacing Starting Relay,
reverse the steps above.
REF NO. SM7715029-00-11
P a g e
15
Advertisement
