OCEM IRM Operation And Maintenance Manual page 27

4.3.2 Alarm threshold
Alarm limit value (default value: 0.20 MΩ).
If the resistance value if the insulation value falls below the set threshold, the ALARM signal activates.
The overcoming of the threshold is locally signalled by turning on the LED ALARM (red).
The same information is transferred to the supervisor through the data connection.
If present, the remote signalling system (optional) activates the relay by exchanging the
status of the respective contacts NO-NC.
UT-MT-0930_1.3_220421 (EN)
Operation and Maintenance Manual
IRM
27