Table of Contents
Advertisement
8. Connection of detachable wiring plug
Attentions
• Be sure to use the shield wire.
• Please pay attention to the exposed part of the wire. Please avoid tin plating.
When tying the wire, if the solder is damaged, it may increase the contact resistance, resulting in an abnormally
increased temperature at the contact site.
Use the AWG 16-28 type for the wire type.
• Exposed part of the wire
• Connection steps for the
Step
1. Unscrew the screw in the terminal and insert
the cable.
Step
2. Tighten the screw in the terminal.
Make sure the wire is not extended
and elongated.
Remark
Recommended one-shaped screwdriver: the width of the blade mouth is about 3 MM.
Shape of the screwdriver knife port
connector.
tighten
terminal screw
1
ACTIVE-B
ACTIVE-A
one-shaped screwdriver
unscrew
detachable wiring plug
5
H (+)
C (-)
E (GND)
10
Advertisement
Table of Contents
