Related Manuals for Glidecam Industries Light-Force Battery Grip
Summary of Contents for Glidecam Industries Light-Force Battery Grip
- Page 1 Light-Force Battery Grip USER MANUAL glidecam.com © GLIDECAM 2022. ® All trademarks and registered trademarks are the property of their respective owners.
-
Page 2: Names Of Parts
Introduction Thank you for purchasing Glidecam Light-Force Battery Grip. This b. anti-twist product is a high-capacity power grip that can extend your video a. mounting plate pin hole camera run time up to 4 hours. Please read this User Manual carefully and follow the safety guidelines strictly before using it. - Page 3 Note: Ensure the USB adapter supports one or more of the following Glidecam Light-Force Battery Grip can be installed on a wide range output specifications. of cameras by simply replacing the mounting plate and dummy battery.
- Page 4 Mount to Camera Bottom Note CONT. 1. When using the camera’s USB-C port for power supply, the camera’s battery compartment must have a battery installed. In Canon R5/R5c/R6 addition, the camera battery will be charged when the camera’s Versions for the Canon R5/R5c/R6 include a pre-installed locating pin USB-C port supplies power.
-
Page 5: Safety Instructions
Safety Instructions Using Glidecam Light-Force Battery Grip Safely: █ Always make sure that your Battery Grip is mounted securely and is unable to fall onto anyone nearby. This is especially important when there are children present who might be tempted to pull on cables. -
Page 6: Specifications
Specifications Warrenty One Year Physical Specifications Battery Grip Dimensions (W x 138*79*57(mm) H x D mm) Battery Grip Weight (without 464g/16oz dummy battery) Dummy battery length 10cm/3.9inch Mount points Top: 1/4-20 Screw x1 Bottom: Arca-swiss standard plate x1 with 1/4-20 x3, 3/8-16 x1" Environmental Operating temperature (C/F) -10℃—60℃... - Page 7 Regulators 61000-3-2:2019+A1:2021 BS EN 61000-3-3:2013+A1:2019+A2:2021 Hereby,declares that this equipment is in compliance with the Electromagnetic Compatibility Directive 2014/30 Test standards: EN 55032:2015+A11:2020+A1:2020 0EN 55035:2017+A11:2020 EN IEC 61000-3-2:2019+A1:2021 The products have been tested with listed standards EN 61000-3-3:2013+A1:2019+A2:2021 and found in compliance with the Directive (EU) 2015/863 - Amendment of EU RoHS Directive 2011/65/EU Annex II.
- Page 8 Light-Force Battery Grip For further information, please visit gliecam.com 42 Winter St. Suite 10. Pembroke, MA 02359 Designed by Glidecam Assembled in China United States...
Need help?
Do you have a question about the Light-Force Battery Grip and is the answer not in the manual?
Questions and answers