Other Settings - HMM Diagnostics smartLAB bike1 Instruction Manual

5. Other settings

• Zone: Set the value for heart rate zone, power zones
and cadence zones respectively.
• Alarm: Set the alarm to heart,power and cadence. The
device will beep when it reaches the preset value and a
warning message will be displayed while cycling.
• Smart Pause: When this function is enabled, the wheel
recording is automatically paused when the speed is 0. It
continues when the speed is detected.
• Altitude: Set the numbers here to calibrate to the
current altitude.
• Smart Lap: Set the location or distance used for smart lap
counting.
• Tone: Set the key tone and the warning tone.
• Backlight: Set the mode how to turn off the backlight and
brightness.
• Unit: Set the unit to Metric System or Imperial
System.
16
G
Cycling.
Table
bike
User Sensor History
Sync
GPS settings.
28 C