Related Manuals for NHT VS-2a
Summary of Contents for NHT VS-2a
- Page 1 VS-2a Audio / Video Satellite Loudspeaker OWNER’S MANUAL Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT-9993...
- Page 2 The result is uniform frequency response to a wide range of listening positions. Placement The VS-2a is designed for use as either a center channel speaker in its horizontal orientation, or a satellite speaker in its vertical orientation. The VS-2a is designed for indoor use only.
- Page 3 (fig. 2). This foot is used to angle or aim the speaker so that it radiates sound directly toward the listening position. The foot can also be used to level the VS-2a if the top of the TV has an uneven surface. Attach the rub- ber pad to the bottom of the foot to prevent it from sliding.
-
Page 4: Parts List
There are two ways to mount the VS-2a to the wall with the supplied mounting bracket: horizontally or vertically. Before installing the bracket, determine the desired orientation of the speaker. If the VS-2a’s are to be mounted on the side walls and behind the listening position, it is advisable to mount them vertically, using fig. 5... - Page 5 If the VS-2a’s are to be mounted on the rear wall of the room, it is advisible to mount them horizontally and high up on the wall, using the cabinets’ shape to aim the speakers down- ward toward the listening position.
-
Page 6: System Configurations
1- Use a pair of VT-2 Audio / Video Towers for the front left and right speakers and three VS-2a’s for the center and rear speakers. Configure all low frequencies to be sent to the VT-2’s. Since the VT-2’s have built-in subwoofers, a separate subwoofer is an option and not a necessity in this system. -
Page 7: Limited Warranty
Altered, defaced or removed serial numbers void this warranty. Your Rights The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages. NHT limits its obligations under any implied warranties under state laws to a period not exceeding the warranty period.