Related Manuals for NHT VS-1.4
Summary of Contents for NHT VS-1.4
- Page 1 VS-1.4 Audio/Video Satellite Loudspeaker OWNER’S MANUAL Now Hear This — 527 Stone Road, Benicia, CA 94510 Parts & Warranty Service: 800-225-9847...
- Page 2 (fig. 2). This foot is used to angle or aim the speaker so that it radiates sound directly toward the listening position. The foot can also be used to level the VS-1.4 if the top of the TV has an uneven surface.
-
Page 3: Parts List
Speaker Stand and Shelf Mounting When used in the vertical (upright) orientation, the VS-1.4 may be placed on a rigid speaker stand. NHT offers a 26.5” stand (OneStand) which is ideally suited for the VS-1.4. Refer to the OneStand owner’s manual for detailed installation instructions. -
Page 4: Wall Mount Bracket
If the VS-1.4’s are to be mounted on the side walls and behind the listening position, it is advisable to mount them vertically, using the cabinets’ shape to aim the speakers inward toward the listening position. If the VS-1.4’s are to be mounted on the rear wall of the room, it is advisable to mount them horizontally and high up on the wall, using the cabinets’... -
Page 5: System Configurations
1- Use a pair of VT-1.4 Audio / Video Towers for the front left and right speakers and three VS-1.4’s for the center and rear speakers. Configure all low frequencies to be sent to the VT-1.4’s. Since the VT-1.4’s have built-in subwoofers, a separate subwoofer is an option and not a necessity in this system. -
Page 6: Operation
Operation The VS-1.4 was designed to handle a wide range of listening levels, but every speaker has limits. It is important to use common sense and listen for signs of possible distress from the speakers. Underpowered amplifiers are most often the cause of speaker damage. - Page 7 NHT without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of NHT.