Detaching The Lens; Attaching The Lens - Panasonic ET-ELT30C Operating Instructions Manual

Detaching the lens / Attaching the lens (continued)
* The illustration for this procedure uses PT-SLZ71C as an example.

Detaching the lens

Lens release button fixing screw
Lens release button fixing screw hole
i)
Lens release button
ii)

Attaching the lens

Red marks
Guide groove
Projection lens guide
Lens release button fixing screw
J
The lens release button is held down by using the lens release button fixing screw (sup-
plied in the accessories of the projector), and the projection lens cannot be removed.
When mounting it to the projector, refer to the steps 1) to 2) of "Detaching the lens".
iii)
Projection lens
Guide groove
Projection
lens guide
Projection lens
Before removing the projection lens, if the lens release
button cannot be released the lock even if you press
it, proceed the step 1) and 2).
1) Place the projector upside down on a soft
cloth.
2) Use a Phillips screwdriver, remove the
lens release button fixing screw by turn-
ing it in the lens release button fixing
screw hole in the counterclockwise direc-
tion.
3) Turn the projection lens completely in the
counterclockwise direction while press-
ing the lens release button to detach the
lens.
Attention
Attach the supplied lens caps before storing the
z
lens.
1) Align the red mark on the projection
lens with the red mark on the projec-
tor, and insert the projection lens to the
end.
2) Turn the projection lens clockwise until
it clicks.
Attention
Turn the projection lens counterclockwise to
z
confirm that it does not come out.
ENGLISH - 5