Related Manuals for NHT HDP-2
Summary of Contents for NHT HDP-2
- Page 1 HDP-2 Hybrid-Dipole Surround Loudspeaker OWNER’S MANUAL Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT-9993...
- Page 2 Mount the HDP-2’s at least a few inches from the ceiling. The HDP-2 is designed for indoor use only. When the HDP-2’s are mounted on the side walls, it is very important that you mount the “right” speaker on the right side of the room and the “left”...
- Page 3 1/4-inch thickness to fit betwen the wall and the HDP-2.. 8. Hold up the HDP-2 so that the top keyholes are aligned with the wall screws (Fig. 4). The other keyholes are not used for this product. Carefully place the brackets over the screws so that the screw heads slide into the round sections of the keyholes.
- Page 4 Operation The HDP-2 was designed to handle a wide range of listening levels, but every speaker has limits. It is important to use common sense and listen for signs of possible distress from the speakers. Underpowered amplifiers are most often the cause of speaker damage. For example, a 60-watt amplifier runs out of power when called upon to produce more than 60 watts, and the resulting distortion can damage the speaker.
-
Page 5: Limited Warranty
Altered, defaced or removed serial numbers void this warranty. Your Rights The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages. NHT limits its obligations under any implied warranties under state laws to a period not exceeding the warranty period.
Need help?
Do you have a question about the HDP-2 and is the answer not in the manual?
Questions and answers