Accessing Memory Editor - NEC Memory Editor User Manual

Accessing Memory Editor

Each time that you want to use Memory Editor:
1. Check the NEC Wireless Phone's battery level icon in the status bar of the Idle screen
for sufficient charge. The USB cable does not charge the phone's battery.
2. Insert the computer end of the USB cable into the computer's USB port. Always use
the same computer USB port.
3. Gently squeeze the release clips on each side of the USB plug ad insert into the
adapter port of the NEC Wireless Phone.
• Be sure that the rectangular opening on the connection is lined up with the
rectangular opening in the wireless phone. The plug will slide easily into the
opening. DO NOT FORCE THE PLUG!
4. Press the
5. Double-click on the Memory Editor icon on the desktop or go to Control Panel,
Programs, Memory Editor, and MemoryEditor a525. The Memory Editor
window displays.
The USB cable must be connected to your computer and NEC Wireless Phone, the NEC
Wireless Phone powered on, and the Memory Editor window displayed in order to
transfer any files.
(End/On-Off) key to power-on the NEC Wireless Phone.
38