Connecting The Usb Cable To The Nec Wireless Phone - NEC Memory Editor User Manual

Connecting the USB Cable To the NEC Wireless Phone

Before installing the NEC USB Drivers, connect the USB cable to your computer and the
NEC Wireless Phone.
1. Find the location of the USB port on your computer.
2. Insert the computer end of the USB cable into the computer's USB port.
3. Gently squeeze the release clips on each side of the USB plug and insert the plug into
the adapter port of the NEC Wireless Phone.
• Be sure that the rectangular opening on the connector is lined up with the
rectangular opening in the phone. The plug will slide easily into the opening. DO
NOT FORCE THE PLUG!
4. Press the
New Hardware Wizard displays.
NOTE: Check that the NEC Wireless Phone's battery level icon in the status bar of the
Idle screen shows to be fully charged.
The USB cable does not charge the phone's battery.
Plug into USB Port
on PC
(End/On-Off) key to power-on the NEC Wireless Phone. The Found
Insert
Release
Clips
22