RD WORKS GD9315BCW-NP Owner's Manual page 7

2、Setting Desired Temperature
Or
Or
Or
Or
3、Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a
certain set time, and can only be set while the heater's display is in the "On" position.
Or
High Mode uses 1500W; Low Mode uses 1000W. ECO
mode is an Economic Energy Saving Function. When ECO
mode is chosen, the heater will manage itself from less to
more heating power (watts) in an attempt to maintain a
constant warm 68℉(20℃).
Or
Adjust the desired temperature by pressing the Up/Down
arrows on the control panel or remote control.
Desired temperature options vary from 59℉ to 86℉，or
from 15℃ to 30℃. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press ℃/℉ button to change the display temperature
between Fahrenheit and Celsius.
The Fahrenheit indicator LED will light , when the
temperature is displayed in Fahrenheit.）
The Celsius LED will light, when the temperature is
displayed in Celsius.
Turn the heater to the "On" position .Press the Timer
button on the heater's control panel or the remote.
The digital display changes from the "temperature" to the
"hours" option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off .The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increments).
7