Table of Contents
Advertisement
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1、Start and select working mode
Or
Or
Remote Control
Temp up button: to make set temperature rise
ON/OFF button: Used for power-on or power-off
Temp down button: to make set temperature decline
Mode button：Used for mode selection
℃/℉ button: Button for alternating between Fahrenheit and Celsius
Timer button: Used for setting timer and adjust time value of timing
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at first.
Fan will prolong working for 3 min to emit plenty of heat
inside. This mark will indicate running during the 3 min.
Select a heat Mode
Press the MODE button to toggle between the three heat
modes.
6
Advertisement
Table of Contents
