Table of Contents
Advertisement
No. Security
1
Change PINs
2
PIN activate
3
Change security
code
4
Phone lock
5
Bar calls
6
Fixed dialling
Network (M18)
☛
1 8
For settings provided on the Network screen, see "Roaming" on page 15.
Connection profile (M19)
☛
1 9
For settings provided on the Connection profile screen, see "Setting the Connection profiles" on page 41.
Settings (M1)
26
Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
Turns on/off the PIN code entry required at starting up the phone.
Changes the security code which is used to set some of functions and unlock the Personal Information Manager
(PIM) features.
The default setting of the security code is "0000".
Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the
security code. After entering the correct security code, you can use the phone normally.
Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was
powered down.
You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing
(dialled) calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming
(received) calls when roaming.
Bar calls facilities are network services and may require a password.
☛
1
Change settings
☛
The selected settings have red bars over their icons.
2
Set password
Changes the bar calls password.
Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
The FDN facility is network dependent.
See also: "Fixed dialling numbers (FDN)" on page 46.
Highlight the type of restriction and the call type, and then
Key in your bar calls password to verify user identification to the network
confirm and save changes to the network.
➔
to save changes.
➔
SK1 to
Advertisement
Table of Contents
