Phone Modes (M12) - NEC e242 User Manual

No. Phone
6 Language
7 LED
8 Earphone type

Phone modes (M12)

Your phone can be set to one of the following modes: Normal mode, Meeting mode, Pocket mode or Car mode.
Any changes made to the settings while in a particular mode will be stored and used when that mode is selected again.
Selecting your phone mode
☛
▲ or 1 2 ➔ Press the appropriate key for the required mode.
You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on the standby screen.
Editing the mode settings
☛
▲ or 1 2 ➔ Highlight the required mode
☛
For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
No. Phone mode setting
1 Ringer
2 Ringer volume
3 SMS tone
4 SMS tone volume
5 MMS tone
6 MMS tone volume
7 Key tone
Selects the language the phone displays.
When you have switched the language to be displayed, please wait until the new setting becomes active.
Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/MMS (including Email)/during a call.
If the personal setting or the Group setting for the LED colour is also set in the phonebook, it has priority
over this LED setting. (See "Allocating a LED colour" on page 52 for details.)
Selects the earphone type from Stereo or Monaural, depending on your earphones (headset).
➔ SK1 ➔ Press the appropriate number for the required setting in the following table.
Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 61 or "Videos (M61)" on page 61 for
details.)
Sets the sound volume for incoming calls.
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 61 for details.)
Sets the sound volume for incoming SMS messages.
Selects the ringtone for incoming MMS or Email messages. (See "Sounds (M62)" on page 61 for details.)
Sets the sound volume for incoming MMS or Email messages.
Turns on/off the key tone.
23