NEC e242 User Manual page 24

No. Call diversion edit options menu (Continued)
2 Paste
3 Disable all
4 Phonebook
5 Add to phonebook Adds the number to the phonebook as a new personal data or saves the number in an existing personal data.
Depending on the conditions, some options may be displayed in gray and not be available.
Call waiting and holding (M162)
This facility informs you that another call is being made to your phone while an existing call is in progress.
Setting up call waiting
☛
➔
1 6 2 1 1 to activate, 1 2 to deactivate the call waiting, or 2 to check the status of call waiting.
Using call waiting
☛
If you are on a call and another comes in, you will be alerted by a beep in the earpiece
☛
To switch the calls, SK1
☛
To merge the calls, SK2 (see "Multi-party calls" on page 8).
☛
To end the current call,
☛
To retrieve the held call SK1
Auto redial (M163)
With the auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone
cannot connect a call if the other party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.
☛
1 6 3 ➔ 1 to activate or 2 to deactivate the auto redial facility.
Line ID (M164)
The line ID (identification) facility is network dependent.
The line ID facility enables you to choose whether or not to send your own phone number when you make a call
and also whether or not to display a caller's phone number when you receive a call.
☛
1 6 4 to display the Line ID screen with a ✔ over an activated line and a ✘ over a deactivated line.
☛
To set the status of each line (see the table on the right), highlight a line (the line will flash when selected).
☛
SK1 to set the line identification on or off
12
Pastes the previously copied number.
Disables the numbers from all the fields.
Displays the phonebook to insert a number in the edit field.
➔
to save the current settings.
➔ SK1 to accept the incoming call.
Line type Setting
Outgoing Send own #
Incoming Show Incoming #
Show connected #
Return own #