Setting Up A Wireless Network Connection - Saladax MyCare Insite Touch Screen Starter Manual

Setting up a wireless network connection

To set up a wireless network connection, press the home button on the
Touch Screen (the launch screen appears), then press
settings. Tap on Network & Internet to enter the Wi-Fi settings. If it is
greyed out (
right side of the screen. Then tap on Wi-Fi to show a list of available
networks.
Follow the steps below to establish a Wi-Fi network connection:
Step 1:
Wi-Fi network list
The Wi-Fi network list
shows all available
wireless networks in
your area. Tap the
desired network to
open the connection
screen.
Note: The Wi-Fi
switch needs to be
turned ON ( ) in
order to see all
available wireless
networks
.
Note: If no Wi-Fi network is available, tethering via another device (e.g. smartphone)
can be used to establish an Internet connection.
inactive) tap on the switch (blue when active) on the
Step 2:
Wi-Fi network
connection screen
Type in the password of
the wireless network (if
necessary) and accept
the input by pressing
Connect to establish a
connection.
4/6
to open the
Step 3:
Wi-Fi network list
The Wi-Fi network list
now shows the status
of the wireless
network connection.
Connected indicates
an active connection.
The wireless network
connection is active
and can be used with
the Touch Screen.
PI MCI-TS Rev 02